Hello, Michael
Hello, Michael
Could you help me with my small problem. Let me explain. The ISP give me address 89.55.190.122/30 with 89.55.190.121(fake-only for this disscusion) as a gateway, after connect this addresses and configuring WAN on static IP everything works fine. But in one destination I’ve 3 different clients which every of them want own public IP, so I wrote to ISP and ask them for few anothers ip. They created additional bloc of addresses 89.25.161.104-111. I try run this addresation by connecting link to the switch and configuring switch (i had the same situation in other location and i made this using cisco business-series switch) but this switch could not do it ( or I didn’t know how do it) . So I took my old wrt flash them on dd-wrt v24 and try to made properly configuration. First time i tried to configure as a router ( for disabling NAT) and I configure LAN for 89.25.161.104/29 and WAN on 89.55.190.122/30. A WAN port of second router I connected to LAN 4 phisical 3 (closest to WAN port) and configure as a 89.25.161.105 with a gateway 104 (then I changed addressing on 89.25.161.105 for dd-wrt and 89.25.161.106 for ASUS router). Of course things are not that simple and it dosn’t work. So I looked for solution and i came here. I made everything the same as you (except addresses ) but it dosn’t work. The situation is now I that I can ping from pc behind the ASUS router to address 89.25.161.105 on a dd-wrt regardless did I plug ASUS WAN to LAN 4 or LAN 1(labels from case)on dd-wrt but I have not connection to Internet and when I connect PC to WiFi on dd-wrt I can not ping the router’s ASUS WAN port. Of course I tried connecting WAN port to every LAN on dd-wrt. Where I made mistake?